Does Bradford White Make Boilers?

Yes. Bradford White lists the Brute FT, Brute Series and Brute Mini boilers in its residential home heating lineup. They're closely tied to designs from its sister company Laars.

Does Bradford White Make an Oil Boiler?

No. Every Brute boiler Bradford White lists runs on natural gas or propane, so oil homes need a different brand or a gas conversion.

Is a Brute FT Combi Enough for a Family?

It depends on your water temperature and fixtures. The BMFTCW-199 lists 9.8 GPM at a 35°F rise and 4.8 GPM at a 77°F rise, so winter flow is far lower than summer.

Who Do I Call for Bradford White Boiler Warranty Service?

Start with your installer. The Brute FT warranty asks owners to contact the installer with the model, serial number and installation date.

Can a Brute Boiler Use My Old Chimney?

No, Brute FT boilers vent directly outside through plastic or stainless pipe. They don't need the chimney at all.

Bradford White Boilers on Long Island

Boiler Brand

About Bradford White Boilers

We install, repair and service Bradford White boilers, and we stock the common parts. Domino Fuel is a licensed and insured family business going back to 1981, and if your heat quits at 2 a.m., we pick up.

Most people know Bradford White for water heaters, but its residential lineup also lists boilers under the Brute name. These are gas-fired hydronic boilers that heat radiators, baseboard or radiant floors.

The engineering comes from inside the family. Bradford White Corporation owns Laars Heating Systems, which builds residential and commercial boilers in Rochester, New Hampshire. The Brute FT spec sheets are Laars documents, and the Brute Series spec sheet pairs the Brute BNTH with the Laars NeoTherm NTH. So a Brute boiler is Bradford White's branded version of Laars designs, sold through the plumbing supply houses that already carry Bradford White water heaters.

Get a Free Quote Today Call (631) 779-3196

All Models Serviced

Model Lineup

Bradford White Boiler Models We Install and Service

On the Brute FT combis, the 140 and 199 in the model name match the input in MBH, so the BMFTCW-199 burns up to 199,000 BTU per hour.

Model	Key Ratings	Good For
Brute FT Wall-Hung (BMFTHW-100, 140, 199)	95% AFUE minimum, 10:1 turndown (140 and 199), 5:1 (100), stainless fire tube heat exchanger, outdoor reset built in	Heat-only systems where floor space is tight
Brute FT Wall-Hung Combi (BMFTCW-140, 199)	95.0% AFUE, 10:1 turndown, 9.8 GPM at 35°F rise or 4.8 GPM at 77°F rise (199)	Heat plus hot water with no separate tank
Brute FT Floor Standing (BFTHF-199)	95.3% AFUE, 199 MBH input, 182 MBH AHRI rating, 10:1 turndown	Bigger homes and basement floor installs
Brute FT Floor Combi (BFTCF-199)	Floor-standing combi boiler and water heater	Large hot water demand in one unit
Brute Series (BNTH-080 to 285)	Condensing, 5:1 turndown, stainless heat exchanger, 12-yr limited warranty	Replacing a larger gas boiler
Brute Mini (BJX050 to 200)	Compact, Economy Mode, 10-yr heat exchanger then prorated to 20 yrs	Smaller spaces and simpler systems

Long Island Homes

Bradford White Boilers for Long Island Homes

Fuel decides first. Brute boilers run on natural gas or propane only. If your home heats with oil and you want to stay on oil, a Brute isn't an option, and we'll point you to an oil-fired boiler instead.

If you're converting from oil to gas, or already on gas, a Brute FT works well in older homes. It vents through PVC, CPVC, polypropylene or stainless pipe up to 100 equivalent feet with 3 inch pipe, so the old chimney can be retired or relined for other equipment. Its built-in outdoor reset lowers water temperature on mild days, which helps a condensing boiler stay in its efficient range with cast iron radiators.

Sizing matters more than people think. A boiler matched to your home's heat loss, not the old unit's nameplate, short-cycles less and lasts longer. Our boiler replacement team runs that calculation before quoting.

Warranty

Bradford White Boiler Warranty

Coverage depends on the line. The Brute FT carries a 10-year non-prorated heat exchanger warranty and 5 years on parts in a single-family home. The Brute Series spec sheet lists a 12-year limited warranty. The Brute Mini covers its heat exchanger fully for 10 years, then on a prorated basis through year 20, with 1 year on parts.

None of these cover labor. The Brute FT warranty also excludes damage from sediment, lime, freezing and contaminated combustion air, and it requires the condensate line to be kept clear.

On top of the manufacturer's coverage, Domino backs every installation with a 1-year labor warranty.

Compare Brands

Bradford White vs Laars Boilers

These are sister brands under one owner, and the overlap is real. Laars lists an FT Series floor boiler, FT Series wall boiler, FT Series combis, NeoTherm and Mini-Therm JX. Bradford White lists Brute FT wall and floor models, Brute FT combis, the Brute Series and the Brute Mini JX. The Brute Series spec sheet is printed alongside the Laars NeoTherm spec.

The practical difference is the sales channel and the name on the cabinet. Bradford White sells Brute boilers through the same pro-only wholesalers that stock its water heaters, so a supply house may carry one name and not the other. When we price a job, we check both. Laars also sells boilers Bradford White doesn't rebadge, such as Combi-Heat and the Endurance replacement boiler. Browse every make we work on at our boiler brands page.

Repair & Service

Bradford White Boiler Repair and Service

We stock igniters, flame sensors, condensate parts and common Brute control components. A yearly tune-up should include a combustion test, condensate trap cleaning and a heat exchanger inspection. Book boiler service before the first cold snap.

No heat with an error on the display: ignition, flame sensing or a blocked condensate trap is usually behind it.
Boiler short-cycles: it's oversized for the home, or the outdoor reset and zone settings need tuning.
Combi gives heat but weak hot water: the domestic water side has scale, or flow is above what the unit can heat at your water temperature.
Water around the boiler: the condensate line is clogged or a relief valve is opening on high pressure.
Banging or kettling sounds: scale or low flow through the heat exchanger needs attention.

Installation

Bradford White Boiler Installation and Replacement

Your price depends on boiler size and model, whether you pick a combi, gas line upgrades, venting, any oil-to-gas conversion work and old tank removal. Call for a quote.

We do a room-by-room heat loss check and look at your radiators or baseboard.
We confirm your fuel, gas line size and where the vent and intake can go.
You get a written quote that compares a heat-only Brute with an indirect tank against a Brute FT combi.
We remove the old boiler, mount the Brute, pipe it with a primary loop where needed and run the vent and condensate drain.
We fire it, run a combustion test, set the outdoor reset and show you the controls.

Bradford White Boiler Installation and Repair on Long Island