Expert repair, tune-ups, and installation for Rheem furnaces across Suffolk and Nassau County, backed by 24/7 emergency service.
Domino Fuel repairs, tunes, and installs Rheem furnaces across Long Island. Our licensed, factory-trained technicians service every Rheem model, with free installation estimates and 24/7 emergency no-heat service.
Licensed & Insured
Factory-trained technicians
All Major Brands
Service & installation
Free Estimates
No-obligation system quotes
Since 1981
Family-owned, local, trusted
Rheem is one of the furnace brands we proudly service and install across Long Island. As part of our full furnace service, our factory-trained technicians know Rheem systems inside and out, from routine tune-ups to full replacements.
Browse all the furnace brands we carry, or see the rest of our heating services.
Rheem is a major US manufacturer offering a full range of gas furnaces, from budget 80% AFUE Classic units to the Prestige R98V at up to 98% AFUE. Many models feature the PlusOne ignition system and a 7-segment LED diagnostic display.
Rheem furnace highlights:
Here is roughly what a new furnace costs to install, using current national averages. Rheem offers both standard and high-efficiency models, so a Rheem install can land anywhere in the ranges below depending on the model you choose.
| Furnace type | Typical installed cost (U.S. average) |
|---|---|
| Standard-efficiency (80-83% AFUE) | $3,800 - $6,000 |
| High-efficiency (90-98% AFUE) | $6,000 - $10,000 |
National averages from HomeAdvisor and Angi (2026): gas furnace installation runs about $3,800 to $10,000 (up to $12,000 for premium modulating units), and the furnace itself is 50-75% of the project. Your Long Island price depends on size, efficiency, ductwork and venting.
Want your exact number? Costs vary from home to home, so we never guess. Get a free estimate for your exact Rheem furnace installation price, with no obligation.
Here is a quick look at the main Rheem furnace models we install and service on Long Island, so you can compare stage, fuel and efficiency at a glance.
| Model / Series | Type | Fuel | Efficiency | Best For |
|---|---|---|---|---|
| R98V (Prestige) | Two-stage, variable-speed ECM | Natural gas / propane | Up to 98% AFUE | Top-tier efficiency and comfort |
| R96V (Prestige) | Two-stage, variable-speed ECM | Natural gas / propane | 96% AFUE | Even, quiet heat for most homes |
| Classic single-stage | Single-stage | Natural gas / propane | 96% AFUE | High efficiency, great value |
| Classic (80%) | Single-stage | Natural gas / propane | 80% AFUE | Standard-efficiency, chimney-vented |
Figures are manufacturer AFUE ratings. Prestige models add the PlusOne ignition system and LED diagnostics.
Every Rheem furnace installation starts with a free in-home assessment and a proper heat-loss (Manual J) calculation, so your furnace is sized right and your ducts can handle it. Our licensed, factory-trained technicians set up an 80% AFUE model out the chimney, or a 90%+ condensing model out a sidewall with a condensate drain, pull permits, connect the thermostat, and fully commission the system before we leave.
We will walk you through single-stage, two-stage and (where offered) modulating Rheem options, plus variable-speed ECM blowers for quieter, more even heat. See our full furnace service or browse all furnace brands.
If your Rheem furnace is short cycling, blowing cold air, making noise or not running, our technicians diagnose and repair it quickly, with 24/7 emergency no-heat service across Suffolk and Nassau County. We carry or quickly source common Rheem parts, so most repairs are finished in a single visit.
Our annual tune-up cleans the burners, inspects the heat exchanger for cracks (a carbon-monoxide safety check), tests the safety controls and blower, and replaces the filter, keeping your furnace safe and efficient and helping keep the warranty valid.
When a furnace is beyond economical repair, or a cracked heat exchanger makes it unsafe, we make replacement simple. We will tell you honestly whether your Rheem furnace is worth fixing or whether a newer, high-efficiency unit will pay for itself in lower bills.
Many Long Island homeowners use a replacement to move up to a 90-98% AFUE furnace with a two-stage or modulating burner and a variable-speed ECM blower for even, quiet comfort. We handle removal and disposal, any venting or duct changes, and available rebates and financing, all with a free estimate up front.
Catching these early usually means a smaller, cheaper fix. Call us if your Rheem furnace shows any of the following:
Repair is not always the smart money. It is usually time to replace your Rheem furnace when you see:
We stock or quickly source the parts that wear out most on Rheem furnaces, so repairs and tune-ups stay fast:
Not sure what your Rheem furnace needs? Contact us or call (631) 779-3196 and we will diagnose it for you.
Not sure which brand fits your home? Explore the other furnace brands we install and service across Long Island.
Common questions about this furnace brand on Long Island.
Yes. Our licensed, factory-trained technicians repair all Rheem furnace models across Suffolk and Nassau County, including 24/7 emergency no-heat service.
Yes. We install and replace Rheem furnaces, sized with a proper heat-loss calculation and installed to code, with a free estimate up front.
Once a year, before the heating season. An annual tune-up keeps your furnace safe and efficient, checks the heat exchanger, and helps keep the warranty valid.
With annual maintenance, a furnace typically lasts 15 to 20 years. We will always give you an honest repair-or-replace recommendation and a free estimate.
Yes. Rheem furnaces are available in high-efficiency models, with many condensing units in the 90 percent AFUE range that lower fuel use. We will help you choose the right size and efficiency.
Yes. We offer financing on new furnace installations on Long Island. Ask about current terms when you get your free estimate.
Get a free, no-obligation quote from your local Long Island furnace experts.
